The Yarway High-Pressure Integral Strainer Trap is designed with Quick Change Trim (QCT) using the proven variable orifice (piston) internals. These traps are designed for a variety of high-pressure applications found in utility, industrial, and marine services.
Typical applications include fuel oil heaters, air heaters, reboilers, soot blower drains, steam separators, and shell and tube heat exchangers. The small lightweight design and broad range of operating pressures are among the many advantages when compared to mechanical traps of the same pressure rating. In addition, the QCT design is renewable in line with the factory set and assembled internals.
Features & Benefits:
Series C-250 and C-260 High-Pressure Traps (variable orifice)
Back Pressure Ratings:
Back pressure to 25% as factory set; (to 55% with removal of split washer, based on absolute pressure, C-250 only).
Applicable Codes and Standards:
Pressure ratings per ANSI/FCI-69-1. Performance testing per ANSI/ASME PTC-39.1, FCI 69.1 and 85.1. End connections per ANSI B16.11.
Series 40 and 40D Lever Valve Traps
The Series 40 and 40D are designed for use in industrial process applications for pressures up to 600 psi and condensate loads to 80,000 lb/hr.
Applicable Codes and Standards:
Pressure ratings per ANSI/FCI-69-1. Performance testing per ANSI/ASME PTC-39.1. End connections per ANSI B1.20.1. for threaded ends, per ANSI B16.11 for socketwelding ends, and per ANSI B16.5 for flanged ends.
